Drying Rack - Maytag MDG6800AWW Manual

RYING RACK (SELECT MODELS)
I) Open dryer door.
2)
3)
4)
5)
6)
Position drying rack in tumbler placing the two rear legs
in the two recessed areas in the back wall of the dryer.
Place the front lip of the drying rack on top of the lint
filter.
Place items to be dried on the rack, leaving space
between them so air can reach all the surfaces.
Close the dryer door.
Use the Time Dry cycle. Select time according to Handle/'_ _ _ _L_
moisture and weight of item. Start the dryer. It may be
// _\//_/Y__ ....... _[] \\ Rear Legs
necessary
to reset the timer if
a longer drying time is
Front/-/f /////____ \\ /
needed. _ _L_i_ti__
SUGGESTED ITEMS
SUGGESTED
TEMP. SETTINGS
i: Washable sweaters (block to
Heat
shape and lay flat on rack)
Stuffed toys (cotton or Heat
polyester fiber filled) ...............................................................................................................................................................................
Stuffed toys (foam or Air Fluff
i rubber filled)
Foam rubber pillows Air Fluff
Air Fluff or Heat
On Dryer Sides:
The drying rack hanger fits between the dryer top and the
dryer cabinet.
I) Place the flange on the hanger in the seam between the
top and the cabinet. Push all the way in.
2) Face the top of the drying rack toward the side of the
dryer cabinet.
3) Place the drying rack handle over the lip of the hanger.
On Dryer Back:
I) Place the drying rack hanger between the dryer top and
the dryer cabinet just below the back of the control
panel.
2) Place the flange in the seam and push all the way in.
3) Face the top of the drying rack toward the back of the
dryer cabinet.
4) Place the drying rack handle on the lip of the hanger.
IO