Page 10
Maximum Capacity (Dry Weight) 170 lbs. 77.1 kg Basket Diameter 51-1/2" 130.8 cm Basket Depth 42-1/2" 107.9 cm Basket Motor 1 HP .746 kw Blower Motor 7-1/2 HP 5.6 kw Door Opening (Diameter) 31-3/8" 79.7 cm Basket Volume 51.2 cu. ft. 1.45 cu.
Page 26
M DG-170 (Gas) M DS-170 (Steam) LECTRICAL ERVICE PECIFICATIONS PER DRYER IMPORTANT: 208 VAC 230/240 VAC ARE NOT THE SAME. When ordering, specify exact voltage. NOTE: A. Fuse ratings are dual-element, time-delay, current limiting, class RK1 or RK5 ONLY. B. Circuit breakers are thermal magnetic (industrial) type ONLY. For others, calculate/verify correct breaker size according to appliance amp draw rating and type of breaker used.
Page 30
Part Part Number Rating Qty. D.M.S.* Qty. D.M.S.* Rating NUMBER Number Number MDG-170 550,000 138,600 140839 140820 880978 Shaded area is stated in metric equivalent * D.M.S. (Drill Material Size) equivalents are as follows: Natural Gas ....#2 = .2210" (5.6134 mm)
Page 33
PERATING TEAM RESSURE 125 psig 862 kPa AXIMUM 100 psig* 689 kPa INIMUM (Normal Load) 19 Bhp NPUT (Approximate) @ 125 329.1 lbs/hr kg/hr ONSUMPTION Shaded areas are stated in metric equivalents * Minimum operating pressure for optimium results.
Page 35
OMPRESSED UPPLY RESSURE Normal 80 PSI 552 kPa Minimum Supply 70 PSI 483 kPa Maximum Supply 90 PSI 621 kPa Shaded areas are stated in metric equivalents...
Page 41
OMPRESSED UPPLY RESSURE Normal 80 PSI 552 kPa Minimum Supply 70 PSI 483 kPa Maximum Supply 90 PSI 621 kPa Shaded areas are stated in metric equivalents...
Page 64
Timing Legend Spin Time Switch Position Number Time in Seconds* Dwell (Stop) Time Switch Position Number Time in Seconds* * Values shown are +/- 1 second.
Page 70
I M P O R T A N T MANUAL RESET HI-LIMIT INSTRUCTIONS FOR DUAL TIMER OR PHASE 5 WITHOUT HEAT FAULT (GAS MODELS ONLY) This dryer is equipped with a burner hi-limit and tumbler/lint chamber hi-limit thermostat which must be reset manually. Discontinue power to dryer before attempting to reset hi-limit.
Page 71
I M P O R T A N T MANUAL RESET HI-LIMIT INSTRUCTIONS FOR DUAL TIMER OR PHASE 5 WITHOUT HEAT FAULT (STEAM MODELS ONLY) This dryer is equipped with a lint chamber hi-limit thermostat which must be reset manually Discontinue power to dryer before attempting to reset hi-limit.