Mercedes-Benz MY15 Manual page 78

Destination Input
76
Information on crosshairs position
3
Set map scale
4
i
The display 3 depends on the settings
selected in "Text information On Map"
( page 62). It may display the current road
Y
if corresponding data is available in the
digital map. Or it displays the geo-
coordinates position of the crosshairs if
Geo-coordinates display
Moving the Map and Selecting a
Destination
To move the map: Slide q m r, o m p or
X
w m x.
To set the map scale: Rotate y m z.
X
Rotating clockwise makes the map smaller,
rotating counterclockwise enlarges it.
To select a destination: Press n once or
X
repeatedly until the Enter Destination
menu is displayed or, if COMAND cannot
define a destination unambiguously, a list
of possible destinations.
To select a destination: Rotate y m z or
X
slide q m r.
Press n.
X
If the destination is within the digital map,
COMAND tries to find the destination on
the map.
If the destination can be found, the Enter
Destination menu is displayed with the
address of the destination. Otherwise you
will see the entry
Map.
To start route calculation: Select Start.
X
Entering Stopover Destination
i
When route guidance is activate, you can
enter a stopover destination. Stopover
is activated. destinations may be predefined
destinations in the following categories
suggested by COMAND for you to select:
ATM/Cash Machine
R
Hospital
R
Gas Station
R
Parking Lot
R
Restaurant
R
However, you can also enter destinations
other than those that have been
predefined. Select the menu item
this purpose.
You can influence the route guidance to the
main destination in a specific way using the
stopover function. Once the stopover
destination has been reached, COMAND
automatically continues the route guidance
to the main destination.
Entering Predefined Destinations
If necessary switch to navigation mode and
X
display menu system (
Select
X
No Stopover Destination available yet
Select a category.
X
A Stopover Destination exists
Select
X
Select a category.
X
Select another stopover destination.
X
COMAND first searches for destinations
along the route within the selected category.
COMAND then searches for destinations in
the vicinity of the vehicle's location.
Destination From
page 57).
Y
Destination £ Stopover.
Change Stopover to change.
Other for