Table of Contents
Advertisement
Radio and Satellite Radio
186
improve voice recognition, you can store a
voice name for a specific speaker.
To select the radio or satellite radio
X
application: Press the ? button on the
multifunction steering wheel.
Say the command
X
Radio.
Press the ? button.
X
Say one of the radio or satellite radio
X
commands explained below.
Commands
You can always give the commands for the
radio when you are listening to the radio, even
if a different application is shown on the
display.
"Help Radio"
Using the "Help Radio" command, you can
have all the commands for the radio read out.
"Help Satellite Radio"
Using the "Help Satellite Radio" command,
you can have all the commands for the
satellite radio read out.
Selecting a Waveband
You can set the waveband with the following
commands:
"FM"
R
"AM"
R
"Next Station"/"Previous Station"
You can start manual tuning and set the next
station using the following commands:
"Next station"
R
"Previous station"
R
Radio
or
Satellite
"Next Category"/"Previous Category"
You can use the following commands to
change the category on satellite radio:
"Next category"
R
"Previous category"
R
Selecting the Frequency (FM Range)
You can select frequencies within the FM
range (87.7 to 107.9 MHz) directly. Voice
control also recognizes the words
"frequency", "point" and "megahertz".
Example of dialog:
s Eighty seven point nine megahertz
u Voice control sets the frequency.
Selecting the Frequency (AM Range)
You can select frequencies within the AM
range (530 to 1710 kHz) directly. Voice
control also recognizes the words
"frequency" and "kilohertz".
Example of dialog:
s Five hundred and thirty kilohertz
u Voice control sets the frequency.
"Save Station"
Using the "Save station" command you can
give a voice name to the station currently
selected. You can also use this command to
improve voice recognition for difficult names
or if you want to use a name of your own. You
could, for example, save a station with the
name "Favorite station".
When you have given the command, voice
control prompts up to three times to say the
station name. When repeating the station
name, make sure that you pronounce it in
exactly the same way as you did the first time.
Otherwise, the name cannot be saved and
voice control aborts the saving procedure.
Example of dialog:
s Save station
t Please say the station name
Advertisement
Chapters
Table of Contents
