Mercedes-Benz MY15 Manual page 186

Address Book
184
Say the surname first and then the first name
if both are entered in the address book.
Example of dialog:
s Dial name
t Please say the name
s Smith
If there is more than one phone
number for an entry, voice control
queries this:
t Do you want to make a work call or a
home call?
or
Please select a line number
s Work
t Smith work. Dialing number.
"Find Name"
Use the "Find name" command to search for
a name in the address book. Voice control
then asks what action you want it to perform:
for example call the selected number, start
route guidance to the saved address or open
the entry.
Example of dialog:
s Find name
t Please say the name
s Smith
u The system shows a numbered list in
the display.
t Please select a line number.
s Line number 1 ...
t Line number 1 accepted.
The system opens the first entry on the
list.
If the selected entry contains at least
one phone number or an address,
voice control asks whether you want
to dial the number or navigate to the
stored address.
"Find Address"
( page 181)
Y
"Delete Name"
Use the "Delete name" command to delete a
voice name from your address book.
Example of dialog:
s Delete name
t Please say the name
s Smith
t Do you want to delete Smith?
s Yes
t The voice name has been deleted
"Read Out Address Book"
You can use the "Read out address book"
command to listen to all names and voice
names in the address book. You can select an
entry during this.
If no name is entered in the name field of the
address book, the phone number or the
address is read out. A name can be entered
later in the name field.
Example of dialog:
s Read out address book
The system reads out all address book
entries. If there are more than 30 entries, the
system asks from which entry it should start
the reading.
i
If you do not say a name, voice control
reads out all address book entries.
To select an address book entry:
X
Press the ? button at the selected
entry.
The entry is selected and shown on the
display. Voice control asks whether the
selected entry should be called, navigated
to or opened.
To cancel the dialog:
X
Press the % button.
You have cancelled the dialog. The system
confirms by responding "Cancel".