Aux Operation - Mercedes-Benz COMAND MY09 Operator's Manual

Audio

AUX operation

AUX operation
An external audio source can be
connected to the COMAND via the 1/8"
socket located inside the glovebox.
1 1/8 inch socket
i
For further information please contact
an authorized Mercedes-Benz Center.
Open the Audio menu ( page 46).
AUX
Press the soft key.
The AUX menu is displayed. The exter-
nal audio source is played back if it is
connected and switched to playback.
82
i
For instructions on how to operate the
external audio source, please see the
operation manual of the device con-
nected.
i
The volume of external audio sources
varies. Therefore, the volume level of a
connected external audio device may
be higher or lower than expected or the
usual maximum volume cannot be
achieved. On certain devices the
volume can be set separately. In this
case, start at a moderate volume and
increase it slowly. In this way you can
determine whether the system is
capable of playback without distortion,
even at high volume.
At the COMAND, you can set the following
for the AUX operation:
Volume ( page 34)
Balance control and fader ( page 36)
Bass and treble control ( page 37)
Sound functions ( page 37)