Mercedes-Benz COMAND MY09 Operator's Manual page 34

In some situations, soft keys may not have
any function and are not operational. A
soft key without function appears shaded
out.
E.g.: Soft keys on the left and right side
Exiting from submenus
Back
soft key 1 to exit a
Use the
submenu. The display switches to the next
higher menu level.
The system does not accept setting
modifications which have not been stored.
There are exceptions where pressing the
Back
soft key will also store new settings.
These exceptions, whenever applicable,
are referenced on the following pages.
Permanent time display
The system permanently shows the actual
time in the status bar.
Time display with ignition on and phone
option installed
1 Actual time
2 Indication of the current field strength
of the mobile phone signal
At a glance
Menu system
i
The time only appears in the status bar
when the ignition is switched on.
If there is no phone connected, the
field strength indicator is not shown.
Time display with ignition on and no phone
option installed
1 Actual time shown with large
characters
33