Mercedes-Benz COMAND MY09 Operator's Manual page 51

Audio
Radio operation
Via frequency
i
Frequenc.
must be activated in the
Audio search function menu, which
appears in the multifunction display.
Access this menu from the
Settings...
menu via the Vehicle
submenu ( page 30). For additional
information refer to separate
Operator's Manual instructions.
Press g or h.
or
Push the joystick to g or G.
The radio will tune to the next
receivable station (FM, AM) or channel
(WB) of descending/ascending
frequency depending on the direction
of seek.
WB direct channel selection
Press a number key 1 through 7.
50
i
The selected channel is not shown in
the status line.
Manual tuning (FM, AM)
Activate the desired wave band
( page 48).
Press g or h longer than 2 se-
conds.
The function rapidly scans the
frequencies.
Press g or h repeatedly to
change the frequency step by step.
or
Push the joystick to H or h.
Each push of the joystick will change
the frequency by one step.
FM Band
The frequency displayed will change in in-
crements of 0.2 MHz.
AM Band
Tuning will take place in increments of
10 kHz.
Station selection via direct frequency
entry (FM, AM)
E.g.: 102.7 MHz in the FM band
Activate the desired wave band
( page 48).
Press *.
An input line will appear.
Enter the desired frequency with the
number keys within 8 seconds, e.g.
1027 for 102.7 MHz.