Smooth Fitness smt-935bt User Manual page 12

9.35 TREADMILL
ASSEMBLY
STEP2: Attach the Console to Left and Right Uprights
NOTE: Make sure all wires are recessed into the frame. DO NOT trap or
Pinch the Data Cables. DO NOT tighten the bolts until STEP3.
1. Connect the lower data cables(34) from the right upright to the upper data
cables from the console(35)
2. Push the excess wire down into the upright making sure not to pinch the
wire when the console is attached
3. Slide the console on the left and right uprights.
4. Secure the left and right uprights to the console using 8x M10*20mm
bolts(66) and 8x M10 washers(65).
5. Hand tighten only
Ensure the connector pins are straight when
connecting the data cable
66
65
Caution Pinch point! Do not pinch wires
between the frame.
The bolts should be hand tight only
X8
X8