Page 1
OWNER’S MANUAL SMT9.2P SMT9.2AB Model Name SMT9.2/SMT9.2AB Serial Number Purchase Date Write down for future reference. treadmillbynet.com Smoothfitness.com SALES: (888) 559-8810 SERVICE: (888) 340-0482 Smooth Fitness Part# 15-0125 Mt. Laurel, NJ...
Table of Contents Information Model Name Descriptions Model Specifications Important Safety Information Before You Start Warm Up Exercises Assembly Instructions Power Requirements Console Functions and General Descriptions Console Layout Program Operating Instructions—Quick Start Manual Mode Program Operating Instructions—Program Mode Program Operating Instructions—Customizing Pre-set Programs Program Operating Instructions—User Defined Programming Program Profiles Belt Adjustments and Tension...
Each Smooth treadmill has a model name and unique serial number. The serial number label is located on the back of the console upright. Model name sample: SMT9.2AB This model name is a Smooth 9.2 treadmill with programming and an AeroBelt.
1 Year 1 Year Motor, Parts, Frame, & Labor 1 Year Motor, Parts, Frame, & Labor 30” X 70” 400 lbs. Lifetime SMT9.2AB 3.0HP Four Multi Function LED Windows, One Multi- function Dot Matrix 0 to 15% .6 to 10 MPH AeroBelt 2-Ply 20”...
The treadmills have a user maximum capacity of 400 pounds. The treadmill should only be used on a level surface and is intended for indoor use only. The treadmill should not be placed in a garage, patio, or near water and should never be used while you are wet.
Do not stand on the walking belt while pressing the Power button or Start/Stop button. Always adjust the speed of the treadmill in small increments as this treadmill is capa- ble of high speeds. If you are taking medication, consult your physician to see if the medication will affect your exercise heart rate.
Warm Up Exercises EXERCISE GUIDELINES WARNING! Before beginning this or any exercise program, you should consult your physician. This especially important for individuals over the age of 35 or individuals with pre-existing health problems. Warming up prepares the body for the exercise by increasing circulation, supplying more oxygen to the muscles and raising body temperature.
2. Now tighten the buttonhead screws securely from step 1. 3. Install motor hood cover using 5/8” phillips head screws (8 screws). Be sure the treadmill is level to the floor. The rear feet can be adjusted to level the treadmill. Assembly is now complete!
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges, and noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of treadmill damage, always use a surge protector (not included) with your treadmill.
The Speed Bar allows the user to adjust speed quickly. The Speed Bar works in all manual and program modes. To use the Speed Bar, the belt must already be moving. Press the desired speed (2 through 8), and the treadmill will slowly reach the speed selected.
IMPORTANT! Please note that the Console Overlay used on the SMT9.2AB will read SMT9.2P. The only difference in the two models is the type of walking belt used. The SMT9.2AB uses a thick, orthopedic-style belt. To verify the model you have received, review the SERIAL NUMBER LABEL located on the console upright. The Serial Number Label will indicate the actual model number.
Pre-Set Program Descriptions Rolling Hills Program The Rolling Hills Program is designed to vary treadmill elevation while maintaining a constant walk- ing belt speed. Speed Intervals Program The Speed Intervals Program is designed to vary treadmill speed while maintaining a constant ele- vation.
Program and Operating Instructions PROGRAM MODE continued Customizing Pre-Set Programs Customizing programs in P1 and P2 Mode: Each pre-set program can be customized in the P1 or P2 mode. After making the program selection, the top right window (CALO- RIES / DISTANCE) will read “OP.” ”OP” refers to “original program” and is preset. Press the same program button once more, and the CALORIE / DISTANCE window will read P1.
SPEED INCLINE 1 2 3 4 5 6 7 8 9 1 0 The Speed Intervals Program is designed to vary treadmill speed while maintaining a con- stant elevation. SPEED INCLINE 1 2 3 4 5 6 7 8 9 1 0 The Weight Loss Program is designed to alternate between the programmed speed and incline.
WALKING BELT IS SHIFTING TO THE LEFT (Diagram 1) First, turn treadmill on to run at 1 mph. Using the hex key provid- ed, turn the left rear roller adjustment bolt ¼ turn in the clockwise direction.
6” from the front of the treadmill. Apply the silicone spray to the walking board, moving from the front of the treadmill to the rear. Repeat this on the other side of the belt. Spray approximately 4 seconds on each side.
(Refer to “Power Requirements” on page 8) 3 Check the circuit breaker located on the front of the treadmill. If the switch protrudes, it has tripped. Wait five minutes and then press the switch back in.
Parts & Exploded View Left Side Extrusion Rail Right Side Extrusion Rail Treadmill Belt AeroBelt Front Roller Assembly Rear Roller Treadmill Deck Left End Cap Right End Cap Rear Adjustable Foot (2) Main Frame Bottom Motor Pan Part # 05-0028...
This Limited Warranty becomes VALID ONLY if the treadmill is purchased from a Smooth Fitness authorized dealer unless otherwise authorized by Smooth Fitness in writing (if anyone other than a Smooth Fitness authorized dealer sells a Smooth Fitness treadmill, the warranty will be void unless accompanied by written authorization by Smooth Fitness).