Camera Head - Sony IPELA SNC-VM772R Installation Manual

f Side conduit hole (
3
(2.0 mm ( / inches)-pitched, hole diameter
32
ø27 mm (1 1 / inches)))
8
Connect a pipe to this hole. There is a conduit hole on the
side of the camera unit. The conduit hole cover is installed
in the side conduit hole at the factory.
Remove the cover as needed and connect the pipe to the
hole.
An M25 cable gland can be connected to the hole by
removing the nut inside the camera unit.
Note
Take care not to trap the cables between the camera and the
ceiling or the wall. If the cable is trapped, it may cause a
fire or electric shock due to breaking.
g Camera head
h Lens
3
/ inches NPT or M27
4
4