Mazda 2010 Mazda3 4-Door Owner's Manual page 295

A maximum of seven devices including
hands-free mobile phones and Bluetooth
audio devices can be programmed to one
vehicle.
NOTE
A device can be programmed only when the
l
vehicle is parked. If the vehicle starts to
move, the pairing procedure will end.
Programming is dangerous while driving -
pair up your device before you start
driving. Park the car in a safe place before
programming.
If a Bluetooth device has already been
l
programmed to the vehicle as a Bluetooth
audio device, it does not need to be
programmed again when using the device
as a hands-free mobile phone. Conversely,
it does not need to be programmed again as
a Bluetooth audio device if it has already
been programmed as a hands-free mobile
phone.
Since the communication range of a
l
Bluetooth equipped device is about 10
meters (32 ft), if a device is placed within a
10-meter (32 ft) radius of the vehicle, it may
be detected/programmed unintentionally
while another device is being programmed.
1. Activate the Bluetooth application of
the device.
NOTE
For the operation of the device, refer to its
instruction manual.
2. Press the pick-up button or talk button
with a short press.
3. Say: [Beep] Setup
4. Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
5. Say: [Beep] Pairing options
Bluetooth Hands-Free
6. Prompt: Select one of the following:
Pair, edit, delete, or list.
7. Say: [Beep] Pair
8. Prompt: Please say a 4-digit pairing
code.
9. Say: [Beep] XXXX (Speak an
arbitrary 4-digit pairing code. This can
be any combination of 4 numbers.)
NOTE
Some devices accept only a particular
l
pairing code (Usually, 0000 or 1234 ).
If pairing cannot be completed, refer to the
owner's manual of your mobile device, and
try those numbers if necessary.
Record the code as it will be used to
l
program your device in Step 16.
10. Prompt: Pairing code XXXX (4-
digit number). Is this correct?
11. Say: [Beep] Yes or No
12. If Yes , go to Step 13.
If No , the procedure returns to Step
8.
13. Prompt: Start pairing procedure on
the device. See the device manual for
instructions.
14. Using the device, perform a search
for the Bluetooth device (Peripheral
device).
NOTE
For the operation of the device, refer to its
instruction manual.
15. Select Mazda from the device list
searched by the device.
16. Input the 4-digit pairing code set in
Step 9 to the device.
17. Prompt: Please say the name of the
device after the beep.
Interior Comfort
6-77