Mazda 2010 Mazda3 4-Door Owner's Manual page 289

2. Turn on the Bluetooth audio device's
power.
Make sure that the
displayed in the information display.
The symbol is not displayed if an
unprogrammed Bluetooth audio device
is being used or the vehicle's Bluetooth
unit has a malfunction.
NOTE
Some Bluetooth audio devices need a certain
amount of time before the
displayed.
3. Press the AUX button to switch the
Bluetooth audio mode to BT Audio .
4. The audio recorded to the Bluetooth
audio device begins playback.
NOTE
If the Bluetooth audio device does not begin
l
playback, press the Play/Pause button
( ).
If the mode is switched from Bluetooth
l
audio mode to another mode (radio mode),
audio playback from the Bluetooth audio
device stops.
If a call is received on a hands-free mobile
l
phone during playback from the Bluetooth
audio device, the playback is stopped.
Playback from the Bluetooth audio device
resumes after the call ends.
Playback
1. To listen to a Bluetooth audio device
over the vehicle's speaker system,
switch the mode to Bluetooth audio
mode. (Refer to
Switching to Bluetooth audio mode )
2. To stop playback, press the Play/Pause
button ( ).
3. Press the button again to resume
playback.
symbol is
symbol is
Bluetooth Audio
Selecting a file (track)
Short-press the track down button (
turn the file dial counterclockwise: Selects
the beginning of the current file (track).
Short-press the track up button (
turn the file dial clockwise: Selects the
next file (track).
Interior Comfort
) or
) or
6-71