Mazda 2010 Mazda3 4-Door Owner's Manual page 294

Interior Comfort
Bluetooth Hands-Free
Basic Bluetooth Hands-
Free Operation
qBluetooth Hands-Free Preparation
Language setting
The available languages are English,
Spanish, and Canadian French. If the
language setting is changed, all of the
voice guidance and voice input
commands are done in the selected
language.
NOTE
If the language setting is changed, device
l
registration is maintained.
Phonebook records are not cleared, but
each language has a separate phonebook.
Therefore, entries created in one language
will need to be re-entered in the phonebook
of the new language.
Do these steps before you start driving.
l
These less used functions are too
distracting to undertake while driving until
you are fully familiar with the system.
Method 1
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] Setup
3. Prompt: Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.
4. Say: [Beep] Language
5. Prompt: Select a language: English,
French, or Spanish.
6. Say: [Beep] French (Speak the
desired language: English , French
or Spanish )
6-76
NOTE
Other language settings can also be made
while in the current setting by saying the name
of the language in the native pronunciation.
7. Prompt: French (Desired language)
selected. Is this correct?
8. Say: [Beep] Yes
9. Prompt: French (Desired language)
selected, returning to main menu
(Spoken in the newly selected
language).
Method 2
1. Press the pick-up button or talk button
with a short press.
2. Say: [Beep] French (Say the desired
language: English , French , or
Spanish .) (Change the desired
language by saying the language
name.)
NOTE
Other language settings can also be made
while in the current setting by saying the name
of the language in the native pronunciation.
3. Prompt: Would you like to change
the language to French (Desired
language) ?
4. Say: [Beep] Yes
5. Prompt: Please wait. Switching to
French phonebook. French selected,
returning to main menu (Spoken in
the newly selected language).
Device programming (Pairing)
To use Bluetooth Hands-Free, the device
equipped with Bluetooth has to be
programmed to the hands-free unit using
the following procedure.