Mazda 2010 Mazda3 4-Door Owner's Manual page 171

NOTE
Release the cruise control switch at the
l
desired speed, otherwise the speed will
continue increasing while the switch is
pressed up, and continue decreasing while
it is pressed down (except when the
accelerator pedal is depressed).
On a steep grade, the vehicle may
l
momentarily slow down while ascending,
or speed up while descending.
Cruise control will turn off if vehicle speed
l
drops below 27 km/h (17 mph) when cruise
is activated, such as when climbing a steep
grade.
Type B
1. Activate the cruise control system by
pressing the CRUISE ON switch.
2. Accelerate to the desired speed, which
must be more than 32 km/h (20 mph).
3. Set the cruise control by pressing the
SET or SET - switch at the desired
speed. The cruise control is set at the
moment the SET
pressed. Release the accelerator pedal
simultaneously.
or SET - switch is
Starting and Driving
NOTE
Release the SET
l
desired speed, otherwise the speed will
continue increasing while the SET
switch is pressed and held, and continue
decreasing while the SET - switch is pressed
and held (except when the accelerator
pedal is depressed).
On a steep grade, the vehicle may
l
momentarily slow down while ascending,
or speed up while descending.
Cruise control will turn off if vehicle speed
l
drops below 27 km/h (17 mph) when cruise
is activated, such as when climbing a steep
grade.
qTo Increase Cruising Speed
Follow either of these procedures.
To increase speed using cruise control
switch
Type A
Press up the cruise control SET
and hold it. Your vehicle will accelerate.
Release the switch at the speed you want.
Driving Your Mazda
or SET - switch at the
switch
Cruise control
switch
5-21