Mazda 2010 Mazda3 4-Door Owner's Manual page 288

Interior Comfort
Bluetooth Audio
7. Press the audio control dial to delete
the selected device.
NOTE
Select GO BACK and press the audio
control dial to return to the PAIR DELETE
display.
8. PAIR DELETED is displayed for 3
seconds after the deletion is completed,
and then it returns to the normal
display.
NOTE
If an error occurs while trying to delete the
programmed device, Err flashes in the
display for 3 seconds and the display returns
to LINK DELETE .
Bluetooth audio device information
display
1. Using the audio control dial, select the
pair device information display mode
DEVICE INFO in the BT SETUP
mode. (Refer to
Bluetooth audio device set-up for
details.)
2. Press the audio control dial to
determine the mode.
3. The name of the Bluetooth unit device
is displayed.
6-70
4. Rotate the audio control dial to select
the information for the Bluetooth unit
which you would like to view.
NOTE
When GO BACK is selected, the display
returns to DEVICE INFO .
5. When the audio control dial is pressed
the information is displayed.
qHow to use the Bluetooth Audio
system
Switching to Bluetooth audio mode
To listen to music or voice audio recorded
to a Bluetooth audio device, switch to the
Bluetooth audio mode to operate the
audio device using the audio system
control panel.
Any Bluetooth audio device must be
programmed to the vehicle's Bluetooth
unit before it can be used. (Refer to
Bluetooth audio device programming )
1. Switch the ignition to ACC or ON.
Device name
BT address