Mazda 2008 Mazda6 Owner's Manual page 194

Interior Comfort
Climate Control System
4. Set the fan control dial to the desired
speed.
5. If dehumidified heating is desired, turn
on the air conditioner.
NOTE
If the windshield fogs up easily, set the
l
mode selector dial to the
If cooler air is desired at face level, set the
l
mode selector dial at the
adjust the temperature control dial to
maintain maximum comfort.
The air to the floor is warmer than air to
l
the face (except when the temperature
control dial is set at the extreme hot or cold
position).
qCooling (With Air Conditioner)
1. Set the mode selector dial to the
position.
2. Set the temperature control dial to the
cold position.
3. Set the fan control dial to the desired
speed.
4. Turn on the air conditioner by pressing
the A/C switch.
5. Adjust the fan control dial and
temperature control dial to maintain
maximum comfort.
CAUTION
When using the air conditioner while
driving up long hills or in heavy
traffic, closely monitor the
temperature gauge (page 5-33).
The air conditioner may cause engine
overheating. If the gauge indicates
overheating, turn the air conditioner
off (page 7-14).
6-8
position.
position and
NOTE
When maximum cooling is desired, set the
l
temperature control dial to the extreme cold
position and set the air intake selector to
the position, then set the fan control
dial to position 4.
If warmer air is desired at floor level, set
l
the mode selector dial at the
and adjust the temperature control dial to
maintain maximum comfort.
The air to the floor is warmer than air to
l
the face (except when the temperature
control dial is set at the extreme hot or cold
position).
qVentilation
1. Set the mode selector dial to the
position.
2. Set the air intake selector to the
position.
3. Set the temperature control dial to the
desired position.
4. Set the fan control dial to the desired
speed.
qWindshield Defrosting and Defogging
1. Set the mode selector dial to the
position.
2. Set the temperature control dial to the
desired position.
3. Set the fan control dial to the desired
speed.
position