Mazda 2008 Mazda6 Owner's Manual page 148

Driving Your Mazda
Starting and Driving
3. Press the SET/COAST button and
release it at the speed you want.
Release the accelerator at the same
time.
Don't continue to hold in the button. Until
you release it, speed will continue to drop
(unless you continue to accelerate) and
you'll miss the desired speed.
NOTE
The SET function can't be activated until
l
about 2 seconds after the ON/OFF switch
has been engaged.
On a steep grade, the vehicle may
l
momentarily slow down going up or speed
up while going down.
Cruise control will turn off if vehicle speed
l
drops below 30 km/h (19 mph) when cruise
is activated, such as when climbing a steep
grade.
5-20
qTo Increase Cruising Speed
Follow either of these procedures.
To increase speed using cruise control
switch
Press the RES/ACCEL button and hold it.
Your vehicle will accelerate.
Release the button at the speed you want.
Your vehicle has a tap-up feature that
allows you to increase your current speed
in increments of 1.6 km/h (1 mph) by a
momentary tap of the RES/ACCEL
button. Multiple taps will increase your
vehicle speed 1.6 km/h (1 mph) for each
tap.