Switches And Controls; Lighting Control - Mazda 2008 Mazda6 Owner's Manual

Lighting Control

qHeadlights
To turn on the lights, turn the headlight
switch on the end of the control lever.
Switch Position
Headlights
Taillights
Parking lights
License lights
Side-marker lights
Dashboard
illumination
NOTE
If the light switch is left on, the lights will
l
automatically switch off 30 seconds after
turning the ignition switch to the LOCK
position or removing the key.
The lights will automatically switch back on
when the ignition switch is turned to the
ACC or ON position.
To prevent discharging the battery, don't
l
leave the lights on while the engine is off
unless safety requires them.
Xenon fusion headlight bulbs
The low-beam bulbs of the headlights
have xenon fusion bulbs that produce a
bright white beam over a wide area.
Off Off On
Off On On
í

Switches and Controls

WARNING
Do not replace the xenon fusion bulbs
yourself:
Replacing the xenon fusion bulbs
yourself is dangerous. Because the
xenon fusion bulbs require high
voltage, you could receive an electric
shock if the bulbs are handled
incorrectly. Consult an Authorized
Mazda Dealer when the replacement
is necessary.
NOTE
If the headlights flicker, or the brightness
weakens, the bulb-life may be depleted and a
replacement is necessary. Consult an
Authorized Mazda Dealer.
qHeadlight High-Low Beam
Push the lever forward for high beam.
Pull back to original position for low
beam.
High beam
Low beam
Driving Your Mazda
í
5-47
Some models.