Setting Change (Function Customization) - Mazda 2008 CX-7 Owner's Manual

CX-7_8X59-EA-07E_Edition3 Page96
Wednesday, July 25 2007 3:17 PM
Knowing Your Mazda
Advanced Keyless Entry and Start System

Setting Change (Function Customization)

The following function settings are possible. These settings can only be changed by an
Authorized Mazda Dealer.
Setting
Advanced key battery KEY indicator light (green) flashes to indicate
dead indicator that the advanced key battery power is low.
Lock/unlock operation A beep sound is heard to confirm that all doors or
confirmation beep the liftgate have been locked/unlocked.
*1
sound
When all doors and the liftgate are closed and the
advanced key is being carried and out of
operational range, all the doors and the liftgate
*2
Autolock function automatically lock after 3 seconds.
(Even if the driver is in the operational range, all
doors and the liftgate are locked automatically
after about 30 seconds.)
*1: When the autolock function is operating, the warning sound will be heard regardless of the setting.
*2: When Autolock function is enabled, windows will not automatically close. You must close before leaving
vehicle.
3-18
Form No.8X59-EA-07E
Function
Black plate (96,1)
After Setting
At Initial Setting
Change
Activated Deactivated
Activated Deactivated
Deactivated Activated