Mazda 2008 CX-7 Owner's Manual page 110

CX-7_8X59-EA-07E_Edition3 Page110
Wednesday, July 25 2007 3:17 PM
Knowing Your Mazda
Doors and Locks
Manual opening/closing
To open a power window to the desired
position, lightly hold down the switch.
To close the power window to the desired
position, lightly pull up the switch.
Master control switches
Close
Driver's
Open
window
Front passenger switch
Close
Open
Auto-opening/closing
To fully open a power window
automatically, press the switch completely
down.
To fully close the power window
automatically, pull the switch completely
up.
To stop the power window partway, pull
or press the switch in the opposite
direction and then release it.
3-32
Form No.8X59-EA-07E
NOTE
(POWER WINDOW RESET PROCEDURE)
If the battery was disconnected during vehicle
maintenance, or for other reasons such as a
switch continues to be operated after the
window is fully open/close, the power windows
will not fully open and close automatically.
Resetting of the automatic function can be
performed using the master control switches
and the front passenger door switch.
The power window auto function reset
procedure can be done on one or both door
switches. The power window auto function will
only resume on the side that has been reset.
1. Turn the ignition switch to the ON position.
Front passenger's
window
2. Make sure that the power window lock
3. Press the switch and fully open the power
4. Pull up the switch to fully close the power
5. Repeat Steps 3-4 for each front power
6. Make sure that the power windows operate
Two-step down function
With the power window completely
closed, press the switch lightly and it will
open and stop about 3 cm (1 in) from the
top.
If you continue to press and hold the
switch, the window will resume opening
all the way.
Black plate (110,1)
switch located on the driver's door is not
depressed.
window.
window and continue holding the switch for
about 2 seconds after the window fully
closed.
window.
correctly using the door switches.