Setting Change (Function Customization) - Mazda RX-8 2010 Owner's Manual

Knowing Your Mazda
Advanced Keyless Entry and Start System

Setting Change (Function Customization)

The following function settings are possible. These settings can only be changed by an
Authorized Mazda Dealer.
Setting
Advanced key battery
dead indicator
Lock/unlock operation
confirmation beep
*1
sound
*2
Autolock function
*1: When the autolock function is operating, the warning sound will be heard regardless of the setting.
*2: When the autolock function is enabled, windows will not automatically close. You must close them before
leaving vehicle.
3-20
Function
KEY indicator light (green) flashes to indicate
that the advanced key battery power is low.
A beep sound is heard to confirm that all doors or
the trunk lid have been locked/unlocked.
When all doors are closed and the advanced key
is being carried and out of operational range, all
the doors automatically lock after 3 seconds.
(Even if the driver is in the operational range, all
doors are locked automatically after about 30 sec-
onds.)
After Setting
At Initial Setting
Activated Deactivated
Activated Deactivated
Deactivated Activated
Change