Table of Contents
Advertisement
DRV EJECT
This command is used to eject media from built-in drives of the device.
Press the "Enter" button when the command menu is displayed, and the LCD
panel display changes as follows. The library is now in Command execution
mode.
DRV EJECT
DRV 1 - NORMAL
Display
DRV1-NORMAL:
Performs an operation in the normal ejection mode for
Drive 1.
DRV1-EMERGENCY: Performs an operation in the forced ejection mode for
Drive 1.
DRV2-NORMAL:
Performs an operation in the normal ejection mode for
Drive 2.
DRV2-EMERGENCY: Performs an operation in the forced ejection mode for
Drive 2.
Button Operations
"Up" button:
Displays the next selection mode.
"Down" button:
Displays the previous selection mode.
"Enter" button:
Performs the DRV EJECT operation for a selected
drive.
"Cancel" button:
Returns to the command menu.
•
When the command ends normally
The following display appears.
DRV EJECT
COMPLETED
•
When the command ends abnormally
The following display appears.
DRV EJECT
ERROR * * / * *
* *
Button Operations
"Up" button and "Down" button: No associated function.
"Enter" button:
"Cancel" button:
After the command is executed, the state of media is maintained as it was
ejected. Perform an appropriate command such as MOVE MEDIUM to move
the media to the slots or eject it from the Import/Export Slot.
No associated function.
Returns to the command menu.
Chapter 4 Commands
56
Advertisement
Table of Contents
