Sony csm-20s Operating Instructions Manual page 25

S-ait library
Table of Contents

Advertisement

Operations
"UP" button:
Displays the next menu.
"DOWN" button:
Displays the previous menu.
"ENTER" button:
Displays the submenu (command menu).
"CANCEL" button:
Confirms the switching to ON LINE mode.
Pressing the "Enter" button displays the available command menu.
Operations
"Up" button:
Displays the next command menu.
"Down" button:
Displays the previous command menu.
"Enter" button:
Performs the command.
"Cancel" button:
Returns to higher menu.
The buttons may operate differently depending on the command menu. For
details, see chapter 4 "Commands" (page 34).
Switching from ON LINE Mode to USER Mode
1
In ON LINE mode, press the "UP" button.
The LCD panel display changes as follows.
<<<ON LINE>>>
USER MODE?
2
Press the "ENTER" button.
The device enters USER mode.
When a password is set for USER mode, a password entry screen appears.
Enter the password on the screen.
If you do not want to enter USER mode, press the "CANCEL" button.
Switching from USER Mode to ON LINE Mode
1
In USER mode, press the "CANCEL" button.
When no password is set for USER mode, the library directly switches to
ON LINE mode.
When a password is set, the following message appears.
<<USER>>
ON LINE MODE?
2
Press the "ENTER" button.
The device enters ON LINE mode.
If you do not want to enter ON LINE mode, press the "CANCEL" button.
25
Chapter 3 Operation

Advertisement

Table of Contents
loading

Table of Contents