Checking The Printer Driver - Sharp MX-M260 Online Manual

2 TROUBLESHOOTING
Printing does not take place

Checking the printer driver

■ Has the printer driver been installed properly?
Check if the printer driver has been installed, following the
steps listed below.
1 Click the "Start" button and select "Control Panel"
and then select "Printer".
● On Windows 2000, click the "Start" button, select
"Settings" and then click "Printers".
●
On Windows XP, click the "Start" button and then click
"Printers and Faxes".
2 Check if the "SHARP MX-xxxx" printer driver icon is
shown.
If the printer icon of the machine does not appear, the printer
driver is not installed correctly. Follow the instructions in the
software setup guide to correctly install the printer driver.
CO NT E N TS
■ Is your machine selected correctly in the current
application for the print job?
Select the printer driver of the machine in the "Print" dialog
box of the application.
● If the printer drivers appear as icons, click the icon of the
machine.
● If the printer drivers are selected from a pull-down menu,
select the printer driver of the machine from the menu.
☞
Basic printing
■ Is the port configured correctly?
It is possible that there is a problem with the port
configuration, for example another printer driver may be
using the port. Open the printer driver properties and
correctly configure the port that you are using.
☞
See "TROUBLESHOOTING" in the software setup guide.
(part 4)
27