Sharp MZ-700 Owner's Manual page 32

2. 3. 1. 3 VERIFY ............................... (abbreviated format: V.)
Format
Function
VERIFY or VERIFY "filename "
This command is used to confirm that programs have been properly recorded on
tape by the SAVE command. This is done by playing the tape and comparing the
program read with the program contained in memory. If both programs are the
same, "OK" is displayed; if they are different, "READ error
" is displayed.
In the latter case, save the program again.
I want to check whether my program has
been properly recorded ...
(2) Type in VERIFY "NAME" lCRl
("NAME" is not necessary if no
file name has been assigned).
Press the
I
PLAY
l
button on the data recorder.
This is displayed if the program finds another program
before that which is to be verified. If that program has
a name, it is displayed where indicated by
'":!<
':K ':K ':K ".
(7) VERIFYING "NAME"
.......___..._..~ Indicates that the tape file is being
Indicates that the program was compared with the program in
not correctly recorded; re-record
it with the SAVE command.
Indicates that th
tape file is OK.
30-----------------------------------------------------------------------