Sharp MZ-700 Owner's Manual page 117

For example characters entered by the C key in different input modes are as follows.
~
/
Normal mode:
Uppercase C
l
I SH
I
FT I+ IQJ Lowercase c
c
I/ EJ
[]'\.
_)
The special keys are explained below.
I
SHIFT
I
Pressing this key allows shift position characters to be entered.
C R
BREAK
GRAPH
ALPHA
For alphabetic keys, the shift position characters are lowercase letters; for keys
other than alphabetic keys, the shift position characters are those shown on the
upper side of the key tops. In the GRAPH mode, the graphic pattern shown on the
right front of each key is entered.
Pressing this key enters a
!CRI
(carriage return) code, terminating the line and moving
the cursor to the beginning of the next line.
Pressing this key enters a BREAK code. Pressing it together with the
I
SHIF.T
I
key
stops execution of a program or operation of the data recorder.
Pressing this key changes the input mode from normal to graphic for input of
the graphic patterns shown on the left front of keys.
Pressing this key changes the input mode from graphic to normal.
The cursor symbol is ~ in the normal mode and[;] in the graphic mode.
--------------------------~--------------------------------------------115