Table of Contents
Advertisement
Note
• When the PinP mode is on and an unsynchronized
RET signal is selected, the small picture on the
viewfinder screen may become unstable. There is
nothing wrong with the viewfinder at this time.
• Markers and characters will also appear in the small
picture on the viewfinder screen when the PinP mode
is on.
If it is hard to see the markers and characters, you can
either select the camera menu mode that
automatically removes this information from both the
viewfinder screen and small picture, or the mode
which automatically turns PinP mode off when the
marker and character display is turned ON.
• The PinP function does not operate when the 3x
speed mode is selected on the BVP-9500WS/
9500WSP.
• When the CA-905L is used with the HDC-950, the
function of the PinP switch changes.
For details, see wl Assignable switch on page 12.
qf VF DETAIL (viewfinder detail) control
Adjusts the amount of detail of the picture on the
viewfinder screen when the VF DETAIL switch is set
to ON. This has no effect on the output signal of the
camera.
Notes
• The viewfinder detail control function has no effect
on a return video signal and a picture on a subscreen
of Picture-in-Picture function.
• VF DETAIL control does not work in the following
conditions:
— The BVP-550 is used.
— The BKP-9057 is attached to this adaptor and the
BVP-570/570WSPK is used.
— BVP-9500WS/9500WSP is used and the 3x speed
mode is selected.
qg VF DETAIL (viewfinder detail adjustment)
switch
ON: Emphasizes the contours of the image on the
viewfinder screen. When the switch is set to this
position, you can adjust the amount of detail using
the VF DETAIL control.
OFF: Disables contour emphasis.
Note
VF DETAIL switch does not work in the following
conditions:
— The BVP-550 is used.
— The BKP-9057 is attached to this adaptor and the
BVP-570/570WSPK is used.
— BVP-9500WS/9500WSP is used and the 3x tape
speed mode is selected.
qh MENU SELECT knob
For menu item selection and value setting on the
viewfinder screen.
qj MENU SELECT switch
ENTER: Activates the selection made by the
MENU SELECT knob.
CANCEL: Cancels the selection made by the
MENU SELECT knob and restores the previously
selected menu item.
For menu operations, refer to System Manual.
qk DISPLAY switch
Used to display the status of the switch settings,
automatic adjustment items, and results on the
viewfinder screen.
ON: The display function is enabled.
OFF: The display function is disabled.
MENU: A menu for setting the displaying items and
functions appears.
For menu operations, refer to System Manual.
ql Spare switch
Note
When the CA-905L is used with the HDC-950, the
function of the spare switch changes.
For details, see wk SCREEN SIZE MARKER switch on page
12.
w; UP TALLY switch
Selects whether to make the lens tally lamp, and
external tally lamp on the viewfinder lit when a red
tally signal is supplied to this camera system.
ON: The tally lamps light.
OFF: The tally lamps do not light.
11 (E)
Advertisement
Chapters
Table of Contents
