Camera-Mounting Section (Inner Base) And The Optional Bkp-9057 Viewfinder Saddle - Sony CA-905K Operation Manual

Camera-mounting Section (Inner Base) and the Optional BKP-9057
Viewfinder Saddle
q; Camera mount
9 Camera mount
release lever
8 Camera mount
slide lever
7 Number holder
1 VF (viewfinder) connector
Connect to the camera connector on a viewfinder.
2 Viewfinder mount
Attach the viewfinder.
3 Viewfinder release button
Push this button to disengage the viewfinder
4 Pan-lock lever
Turn counterclockwise to tighten the viewfinder. Turn
clockwise to loosen the viewfinder.
5 VF connecting cable (supplied with the BKP-
9057) (20-pin)
Connects to the VF connector (20-pin) on the camera.
6 Saddle lock knob
Locks the saddle so it does not topple down. Turn
counterclockwise to tighten the saddle, or clockwise to
loosen it.
8 (E)
7 Number plate holder
Fit the supplied number plates.
8 Camera mount slide lever
Pull this lever to slide the camera mount forward and
backward.
9 Camera mount release lever
To remove the camera from the unit, push this lever
while pushing the safety lever (on the left) rightward.
q; Camera mount
Fit the camera. Slide to the front and rear.
1 VF (viewfinder) connector
2 Viewfinder mount
3 Viewfinder release button
4 Pan-lock lever
5 VF connecting cable
6 Saddle lock knob