Setting The Wash Programme - Maytag Neptune MAH7550AGW User Manual

O I
PERATING NSTRUCTIONS CONT
S W
ETTING A ASH
If there are no words on the touchscreen, open the door, touch any key (except off), or touch the screen to "wake" the controls.
Press "Start/Pause" or
change your selections below.
fabric
options
cottons
end chime medium
wash temp
60 C
spin speed
1000 rpm
more
programmes
Step 1
Home Screen – You
immediately start a cycle using the
default wash settings or choose
"More Programmes" for other
types of programmes. If you wish
to modify the wash cycle, the
following variables can be changed:
More Programmes
rinse & spin spin only
automatic dispenser &
machine cleaning
favourites
More Programmes – Select "More Programmes"
to choose between the following four options:
Rinse and Spin (allows up to four rinses)
Spin Only
Automatic Dispenser and Machine Cleaning
Favourites
Step 2
If you are satisfied with the selections,
press the Start/Pause touchpad to begin
the programme.
As you use the touchscreen, if
you feel you are lost, press
Back or Home.
NOTE: Not all Wash Temps, Spin Speeds,
and options will be available for the various
fabric selections. Some will appear "greyed
out."
P
ROGRAMME
Press "Start/Pause" or
change your selections below.
Fabric
fabrics
cottons
cottons
wash temp
60 C
delicates/
synthetics
spin speed
1000 rpm
quick wash
more
programmes
Fabrics – Select "Fabric" to
select the appropriate fabric
may
setting.
Add a Pre-wash
Add a Pre-soak period
Add Extra Rinse
No Final Spin
Economy
1/2 Load
Remind Chime
End Chime
Short Programme
Delay Wash
.
Press "Start/Pause" or
change your selections below.
fabrics
options
cottons
reduced
program chime med.
ironing
wash temp
60 C
woollens 30 C
spin speed
1000 rpm
50 C
more
programmes
Wash Temp – Select
"Wash Temp" to select
the appropriate
temperature.
Options
pre-soak
final spin
on off
on
pre-wash economy
on off on
extra rinse 1/2 load
on off on
continue
Options – This has two screens that has many different options which can
be toggled on and off. To access the additional screen press the arrow key
in the upper right corner of the screen. Press "Continue" to return to
the review screen. Below is a table showing all the options and a brief
description of each one.
Options
Adds a pre-wash. The Pre-wash compartment is flushed during this
step, followed by the main wash compartment during the main wash.
Adds a standing soaking period of 15 minutes before the main
programme sequence starts.
Adds an extra rinse at the end of the normal programme's rinse
sequence, and just before the final spin.
Will not advance the programme into a final spin. Clothes load will be
wet at the end of the programme.
Limits all wash fills to "Low" and rinse fills to "Medium" and limits the
wash water temperature to 40C regardless of selection. Cancels Pre-
wash if chosen.
Reduces water levels by one setting from "Medium" to "Low" and/or
from "High" to "Medium".
Chimes at the end of the programme, every 5 minutes for up to
2 hours.
Chimes once when wash programme is complete.
Shortens programme time.
Sets the machine to start at a predetermined delay time set by the user.
Delay can be set up to 12 hours and 45 minutes, in 15 minute increments.
7
Wash Temp.
options
program chime med.
cold
wash temp
40 C
spin speed
60 C
programmes
Spin Speed – Select "Spin
Speed"
wash
appropriate spin speed.
remind chime
off
on off
off
delay wash
on off
off
Description
Press "Start/Pause" or
change your selections below.
Spin Speed
fabrics
options
cottons
program chime med.
500 rpm 800 rpm
60 C
600 rpm 900 rpm
1000 rpm
700 rpm 1000 rpm
more
to select the
Options
end chime
medium
short programme
on off
continue