Lantronix PremierWave XC Command Reference Manual page 201

no remote address
no ssh username
protocol ssh
protocol telnet
remote address <text>
remote port <number>
show
show history
ssh username <text>
write
http (config-http) level commands
auth <uri>
auth type <uri> digest
auth type <uri> none
auth type <uri> ssl
auth type <uri> ssl-basic
auth type <uri> ssl-digest
authentication timeout <minutes>
clear counters
clear log
clrscrn
default authentication timeout
default log format
default max bytes
default max log entries
default max timeout
default port
default secure port
default secure protocols
delete auth <uri>
exit
log format <text>
PremierWave® XC Intelligent Gateway Command Reference
Clears the remote address of the host.
Clears the SSH username associated with the host.
Sets the protocol to SSH.
Sets the protocol to Telnet.
Sets the IP address of the remote host to connect to when
this host is selected on the login connect menu. <text> =
IP address.
Sets the remote port used to connect to the host. <num-
ber> = port to be used.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Sets the username for logging into the host via SSH.
<text> = username.
Stores the current configuration in permanent memory.
Creates a new HTTP server authentication directive. <uri>
= URI of the server.
Sets an HTTP server authentication directive to the Digest
Access Authentication scheme. <uri> = URI of the server.
Sets the authentication type for an HTTP server authenti-
cation directive to none. <uri> = URI of the server.
Sets the authentication type for an HTTP server authenti-
cation directive to SSL. <uri> = URI of the server.
Sets the authentication type for an HTTP server authenti-
cation directive to SSL-Basic. <uri> = URI of the server.
Sets the authentication type for an HTTP server authenti-
cation directive to SSL-Digest. <uri> = URI of the server.
For any Digest AuthType, sets the timeout for authentica-
tion. <minutes> = authentication timeout value.
Sets the HTTP counters to zero.
Clears the HTTP server log.
Clears the screen.
Resets the authentication timeout to its default value.
Restores the HTTP Server log format string to its default
value.
Resets the maximum bytes to its default value.
Restores the default maximum number of HTTP Server
log entries.
Resets the timeout to its default value.
Resets the HTTP Server port to its default value.
Resets the HTTP Server SSL port to its default value.
Restores the default secure protocol selections.
Deletes an existing HTTP Server authentication directive.
<uri> = URI of the server.
Returns to the config level.
Sets the log format string for the HTTP server, using the
following directives: %a remote ip address (could be a
5: Commands and Levels
201