Grounding - GE Carry Cool ATL04 Use And Care & Installation Manual

Table of Contents

Advertisement

Read these instructions completely and
IMPORTANT—Observe all governing
codes and ordinances.
INSTALLER—Be sure to leave these
instructions with the Consumer.
CONSUMER—Keep these instructions for
future reference.
ELECTRICAL REQUIREMEN~
FOR PERSONAL SAFETY:
. THIS APPLWCEMUST BE PROPERLY
GROUNDED. See page 3.
DO N~, UNDER ANY C~CUMSTANCES,
CUT OR REMOVE THE THIRD
GROUNDING PRONG FROM THE
POWER CORD.
WE RECOMMEND THAT YOU DO
NOT USE AN EXTENSION CORD OR AN
ADAPTER PLUG WTH THIS APPLNCE.
.
CHANGE THE PLUG ON THE
DO NOT
POWER CORD OF THIS APPLIANCE.
FOLLOW NATIONAL ELECTRICAL
CODES OR LOCAL CODES AND
ORDINANCES.
This appliance must be supplied with 115V,
60 Hz, and connected to an individual, properly
grounded branch circuit, protected by a 15 or 20
amp circuit breaker or time-delay fuse.
If the electric supply provided does not meet the
above specifi~tions, call a licensed electrician.
. Aluminum house wiring may pose special
problems—consult a qualified electrician.
WINDOW REQUIREMEN~
.
Standard double-hung window with actual
opening width of 221/2" to 36!'
bottom of sash to stool.
. Install the air conditioner in a window where
there will be enough clearance around the cabinet
to allow ample circulation of air through the unit.
t
141/z "
min.
For wtndows that do not meet the above requirements, see
SPECIAL INSTALLATION section of this instruction.
Note: All supporting parts should be
secured to firm wood, masonry or metal.
(continued nextpage)
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Carry cool atl05

Table of Contents