Electrical Requirements; Ension Cords; Grounding - GE AVV1O Use And Care & Installation Manual

Electrical
For personal safety, this air conditioner
properly grounded.

Electrical requirements

Do not change the plug on the power cord of this
air conditioner.
Follow national eleetrid codes or ld codes and
ordinances.
a qutied electrician.
grounded outiet protect~d with a 15-amp time delay fuse
or circuit breaker.
plug that mates with a standard 3-prong (grounding) WM
Use of adapter plug
conditions, we stron@y reeornrnend against the use of
an adapter plug. However, if you stil choose to use an
adapter, a tempormy eonnwtion may be made where
most lod hardware stores and make sure the 2-prong
have the circuit chaked by a qtiified el~cian to
make sure the oudet is properly grounded
plug into the w~ oudet
make sure the larger prong
provides the proper polarity
in the mnn~on of the
power cord For proper
grounding, you must dso
screw the adauter to the
Screwing the adaptor to the cover screw til not ground
the air conditioner urdess:
1. me outiet is tieady grounded through
the house ti g; and
2. The rover screw is meti and not insdated
6
OWNER: Keep these instructions for future use.
must
be
models
plan to use is o~y a
2-prong outie4 it is your
personal responsibfity
to have it replaeed with a
properly grounded
3-prong wti outiet.
Do not under any cbumstances, cut or
remove the
power cord.
always hold the adapter with one hand w~e palling the
plug with the other hand. H this is not done, the adapter
ground terrniti is likely to break with repeated use.
DO NOT USE tie ah conditioner unti a proper
ground has again been estabkhe~
Use of etiension cords
of potential safety h=ds under certain
conditions, we strongly reeommend against the use of an
extension cord. However, if you sti choose to use an
extension cor~ it is absolutely necessary that it be a
cord. The current-qing rating of the cord in amperes
must be equal to or greater than the branch circuit sti
shown on the rating nameplate of the air conditioner.
-...". .