Fujitsu ScanSnap S510M Operator's Manual page 84

Color image scanner
Hide thumbs Also See for ScanSnap S510M:
Table of Contents

Advertisement

■ [File name format] button
Set the filename format used for files to save the scanned images.
When you click the [File name format] button, the following window appears.
One of three settings can be specified.
HINT
62
• "yyyy_MM_dd_HH_mm_ss" radio button
The date and time are used as the file name when saving a scanned image to a file.
Example:
When the file is saved in PDF on January 9, 2008 at 12:10:50, the file name will
2008_01_09_12_10_50.pdf."
be "
• "yyyyMMddHHmmss" radio button
The date and time are used as the file name when saving a scanned image to a file.
Example:
When the file is saved in PDF on January 9, 2008 at 12:10:50, the file name will
20080109121050.pdf."
be "
• "Custom File Name" radio button
Enter a name in the "File Name" field and select the number of digits from the
[Counter] pop-up menu. Files are named combining the entered name and a speci-
fied-digit number.
(An example file name is displayed at the bottom of the window.)
About "Counter" (serial number)
When the first time you save a file into the image saving folder, which
you specify on the [Save] tab, using a name specified in the "File
Name" field, the name is suffixed with 1 (it will be 001 if the serial
number, or "Counter," is of three digits). The serial number is
incremented by one every time you save a new file (until you enter a
new file name).
When another file with the same name exists in the image saving
folder, the name is suffixed with the next smallest available number.
Example: Suppose Scan01.pdf, Scan03.pdf, and Scan04.pdf already
exist in the same folder. When the next time you save the scanned
image to files with the same name, the file names will be Scan02.pdf,
and then Scan05.pdf, Scan06.pdf, Scan07.pdf....
When the suffix number becomes greater than the maximum number
of specified digits (for example, when you want to save the 100th file
with two-digit specified for the "Counter"), the number of digits is
increased automatically.
When the number of digits for the suffix number is specified with "0",
the counter is added to the second and following file names only.
Example: If the initial letter of the file is "A" and the number of digits is
"0," the file names will be; A.pdf, A1.pdf, A2.pdf, and so on.

Advertisement

Table of Contents
loading

Table of Contents