Fujitsu ScanSnap S510M Operator's Manual page 166

4. Click the close button
⇒
The "ScanSnap Manager - Scan and Save Settings" window is closed.
HINT
Operation
5. Load the document onto the ScanSnap and press the [SCAN] button
⇒
Scanning is started.
⇒
When scanning is complete, the "iPhoto" window appears.
6. Verify a scanned image in the window.
144
in the upper left corner of the window.
•
To start scanning right after selecting the profile, press the [SCAN] button
on the ScanSnap. Doing so also closes the "ScanSnap Manager - Scan
and Save Settings."
•
Changes you have made in the above procedure take effect from the next
time you scan documents using the profile.
For details on how to change settings, refer to
Settings" (page 80).
•
"iPhoto" profile can be selected by selecting "iPhoto" in the "Select a
Profile" window which pops up when clicking the ScanSnap Manager
icon .
For details, refer to "3.2 Paper Sizes of Documents to be Scanned" (page
43) and "3.3 Loading Documents" (page
"4.3 Saving Scanning
46).
.