Fujitsu ScanSnap S510M Operator's Manual page 60

HINT
3. Select [Select a Profile] in the menu which pops up when clicking and holding the
ScanSnap Manager icon
specify a profile to use for scanning.
Operation
4. Load the document onto the ScanSnap.
5. Press the [SCAN] button
⇒
Scanning is started.
HINT
ATTENTION
38
When [Use Quick Menu] is marked, the document is scanned in Quick
Menu Mode. For details about Quick Menu Mode, refer to
documents in Quick Menu Mode" (page
or click the ScanSnap Manager icon
Refer to "3.2 Paper Sizes of Documents to be Scanned" (page 43)
Loading Documents" (page 46)
on the ScanSnap.
•
By default, documents are scanned in "Duplex Scan" mode when you
press the [SCAN] button. With "ScanSnap Manager," you can change the
mode to "Simplex Scan" mode.
Refer to "4.2 Changing Scanning Settings" (page 53)
•
You can also start the scanning by using the ScanSnap Manager icon
in the Dock menu to select "Simplex scan" or "Duplex scan."
Refer to "4.1 About the ScanSnap Icon" (page 50)
•
Do not connect or disconnect other USB devices during the scanning
operation.
•
Do not close the paper chute during the scanning operation.
•
Do not switch the user to log in during the scanning operation.
32).
for more information.
"Scanning
, and
and "3.3
for more details.
for more details.