Scanning Documents In Profile Mode; Scansnap S510M Operator's Guide - Fujitsu ScanSnap S510M Operator's Manual

■ Scanning documents in Profile Mode

Operation
1. Check for the ScanSnap Manager icon on the Dock menu as shown below.
HINT
2. Unmark [Use Quick Menu] in the menu that pops up when clicking and holding the
ScanSnap Manager icon.
If the ScanSnap Manager icon
the destination in which "ScanSnap" is installed (generally, you select
"Applications," and then "ScanSnap"), and select "ScanSnap Manager" to
start up "ScanSnap Manager."
The icon has been added to the Startup Item on the Mac operating system
during installation, and therefore it appears in the Dock menu when the
Mac OS X starts.
If "ScanSnap Manager" has not been added to the Startup Item in the
"System Preferences" window, follow the procedure below to add it.
•
If the operating system you are using is Mac OS X v10.2, in the "System
Preferences" window, select "Login Items" - "Add," and then add
"ScanSnap Manager" again.
•
If the operating system you are using is Mac OS X v10.3, v10.4, or v10.5,
in the "System Preferences" window, select "Accounts" - "My Account" -
"Login Items (for Mac OS X v10.4 or v10.5)" or "Startup Items (for Mac OS
X v10.3)," and then select "+" to add "ScanSnap Manager."

ScanSnap S510M Operator's Guide

3.1 Flow of Operations
is not displayed, from Finder, select
3
37