Fujitsu ScanSnap S510M Operator's Manual page 247

11. Attach the sheet guide to the ScanSnap.
Hold the pickup tabs on the sheet guide between the thumb and index finger, and then attach
the sheet guide to the ScanSnap.
Sheet guide
⇒
The sheet guide makes a clicking sound when the knobs fix into position.
Make sure that the sheet guide is completely attached. Otherwise,
ATTENTION
document jams or other feeding errors may occur.
12. Close the ADF.
ADF
⇒
You should hear the ADF click when it returns to its original position.
13. Turn on the ScanSnap.
9.3 Replacing the Pick Roller
Pick-up tab
ScanSnap S510M Operator's Guide
Pick-up tab
Paper chute
225
9