Creating A Program By Keyboard Input - DURKOPP ADLER 867-M Premium Operating Instructions Manual

Settings via the software
Operating Instructions 867-M PREMIUM - 00.0 - 02/2015
Symbol Meaning
Sewing foot pressure
Value range: 1 to 20
• Use
parameter.
• Use
Stroke height
Value range: 0 to 9 mm (0.5 mm increments)
• Use
Use
Number of stitches /
length of the current step in mm
Programming mode offers two options for creating new seam
programs:

• Creating a program by keyboard input

• Creating a program by teach-in
8.6.2 Creating a program by keyboard input
1. Use  to switch to step selection.
2. Use to activate the step.
3. Set all parameters for this step.
4. To set up another step, use  on the step display to switch to
the next step.
5. Use to activate the step and set all parameters.
6. Repeat steps 4 and 5 to define up to 30 steps if necessary.
7. Press the ESC key.
 The program is saved.
 The machine switches to Automatic mode.
The program that was just created is selected.
 /  to select the Sewing foot pressure
 /  to change the sewing foot pressure
 /  to select the Stroke height parameter.
 /  to change the stroke height
77