ZyXEL Communications P-2602HWNLI Support Notes page 63

2 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=137
3 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=138
4 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=138
5 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=139
6 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=139
•
Apply the first filter set 'NetBIOS_WAN' to the
setup.
Configure the second filter set 'NetBIOS_LAN' by selecting the Filter Set number 2.
•
Rule 1-Source port number 137, Destination port number 53 with protocol number 6 (TCP)
Filter #: 2,1
Filter Type=
Active=
IP Protocol=
Destination: IP Addr= 0.0.0.0
TCP Estab= No
More= No
Action Matched=
Action Not Matched= Check Next Rule
Press ENTER to Confirm or ESC to Cancel:
Menu 21.2.1 - TCP/IP Filter Rule
TCP/IP Filter Rule
Yes
6 IP Source Route= No
IP Mask= 0.0.0.0
Port #= 53
Port # Comp=
Source: IP Addr= 0.0.0.0
IP Mask= 0.0.0.0
Port #= 137
Port # Comp=
Log= None
Drop
All contents copyright (c) 2006 ZyXEL Communications Corporation.
P-2602HWNLI Support Notes
N D N
N D N
N D N
N D N
N D F
'Output Protocol Filter'
Equal
Equal
in the remote node
63