ZyXEL Communications P-2602HWNLI Support Notes page 143

To configure the phone port setting, please follow the below steps:
Step 1. Open the web browser from your workstation to connect to the Prestige by entering the Management IP
address of the Prestige. The default management IP of Prestige is 192.168.1.1.
Step 2. Enter the administrator password appear on the page of login and click on login. The default is '1234'
Step 3. On the left column click on VoIP -> Phone -> Analog Phone -> Advanced Setup to bring you to voice
function menu.
Step 4. To change the phone port parameter as you desired and click Apply when you are finish to save and let
the setting to take effect.
Each field's detail description is listed below.
Label Description
Use this field to set the loudness that the Prestige uses for the speech signal
Speaking
that it sends to the peer device. -1 is the quietest and 1 is the loudest.
Volume
Listening Use this field to set the loudness that the Prestige uses for the speech signal
Volume that it receives from the peer device and sends to your phone. -1 is the
quietest and 1 is the loudest.
G.168 Active Select this check box to cancel the echo caused by the sound of your voice
reverberating in the telephone receiver while you talk.
Select this check box to use Voice Activity Detection (VAD) to reduce the
VAD
bandwidth that a call uses. The Prestige will generate and send comfort
Support
noise when you are not talking.
When you are dialing a telephone number the Prestige waits this long after
Dialing you stop pressing the buttons before initiating the call. Select how many
Interval seconds you want the Prestige to wait after the last input on the telephone's
keypad before dialing (making) a call.
Click Apply to save your changes back to the Prestige.
Apply
Reset Click Reset to begin configuring this screen afresh.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
P-2602HWNLI Support Notes
143