ZyXEL Communications P-2602HWNLI Support Notes page 135

Step 3. On the left column click on VoIP to bring you to VoIP configuration menu than click on SIP. While in
the SIP Settings page use the account selector on upper right of the page to select the SIP account you will like
to configure.
Step 4. Check active sip box if you like to use this account and fill in the account information the ITSP
provided you in the SIP setting category. Which will normally include you SIP number, SIP local port, SIP
server address, SIP server port, Register server port, Register server address, SIP service domain.
Step 5. In the Authentication category fill in the User Name and authentication password your ITSP provided to
you.
Step 6. If you wish to send caller ID check the check box in the Caller ID category, if you do not wish to send
out caller ID leave the check box uncheck.
Step 7. Click on Apply to save the setting and take effect. If you would like to configure the 2nd SIP account,
please select SIP2 by using the SIP account selector than follow step 1 to 8 to complete the 2nd account setup.
Each field's detail description on this page is listed below.
Label Description
You can configure the Prestige to use multiple SIP accounts. Select one to
SIP
configure its settings on the Prestige.
Account
SIP A SIP account's Uniform Resource Identifier (URI) identifies the SIP account
Number in a way similar to the way an e-mail address identifies an e-mail account. It is
also known as a SIP identity or address. The format of a SIP identity is
SIP-Number@SIP-Srevice-Domain.
A SIP number is the part of the SIP URI that comes before the "@" symbol.
Enter your SIP number in this field. You can use up to 31 ASCII characters.
SIP Local Use this field to configure the Prestige's listening port for SIP. Leave this field
Port set to the default if you were not given a local port number for SIP.
SIP Server
Type the IP address of the SIP server in this field.
Address
Enter the SIP server's listening port for SIP in this field. Leave this field set to
SIP Server
the default if your VoIP service provider did not give you a local port number
Port
for SIP.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
P-2602HWNLI Support Notes
135