Phone Port Settings - ZyXEL Communications P-2602HWNLI Support Notes

P-2602HWNLI Support Notes
1. Setup WEB GUI VoIP, enter device B's number in the SIP number column.
2. Fill in device A's IP into SIP server address, Register server address... as example.
3. Setup speed dial, put device A's information into the column.
After completing the setting, you can dial #01 from the phone under device A, then the phone under
device B will ring.

Phone Port Settings

P-2602HWNLI offers two type of FXS port (POTS x 2, ISDN x 1). Thus, user can decide to use either analog
phone or ISDN phone.
Analog Phone Configuration
Outgoing Call Use -
Here user can define which SIP account(s) to use for outgoing call from analog phone.
141
All contents copyright (c) 2006 ZyXEL Communications Corporation.