ZyXEL Communications P-2602HWNLI Support Notes page 52

4 _______________
5 _______________
6 _______________
Enter Filter Set Number to Configure= 0
Edit Comments=
Press ENTER to Confirm or ESC to Cancel:
2. One rule for blocking all packets from this client
Filter #: 1,1
Filter Type=
Active= Yes
IP Protocol= 0
Destination: IP Addr= 0.0.0.0
TCP Estab= N/A
More= No
Action Matched=
Action Not Matched=
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
Source IP addr................Enter the client IP in this field
IP Mask..........................here the IP mask is used to mask the bits of the IP address given in the
Addr=' field, for one workstation it is 255.255.255.255.
Menu 21.1.1 - TCP/IP Filter Rule
TCP/IP Filter Rule
IP Source Route= No
IP Mask= 0.0.0.0
Port #=
Port # Comp= None
Source: IP Addr= 192.168.1.5
IP Mask= 255.255.255.255
Port #=
Port # Comp= None
Log= None
Drop
Forward
All contents copyright (c) 2006 ZyXEL Communications Corporation.
P-2602HWNLI Support Notes
10 _______________
11 _______________
12 _______________
'Source IP
52