ZyXEL Communications P-2602HWNLI Support Notes page 121

Press ENTER to Confirm or ESC to Cancel:
Key settings for authentication server:
Option Descriptions
Enter a username up to 31 alphanumeric characters long.
User Name
Press [SPACE BAR] to select Yes and press [Enter] to enable 802.1x user
Active authentication through an external RADIUS authentication server. Select No to enable
authentication using ZyXEL AP internal authentication server.
Server Address Enter the IP address of the external RADIUS authentication server.
The default port of RADIUS server for authentication is 1812. You need not change
Port
this value unless your network administrator instructs you to do so.
Specify a password (up to 31 characters) as the key to be shared between external
RADIUS authentication server and ZyXEL AP (RADIUS client). The key is not send
Shared Secret
to the network. This key must be the same on the external RADIUS authentication
server and ZyXEL AP.
2. If accounting is required, you must setup the external RADIUS accounting server. Normally, RADIUS
authentication server and RADIUS accounting server are put in the same machine. However, they own
separated UDP port and shared secret, you can separate authentication and accounting service in two different
RADIUS servers. You can refer to RADIUS authentication configuration.
If you use WEB Configurator, from the Web Configurator main menu, Click Network -> Wireless Lan to setup
the RADIUS authentication and accounting server configuration.
Shared Secret= *****
Accounting Server:
Active= Yes
Server Address= 192.168.1.100
Port #= 1813
Shared Secret= ******
All contents copyright (c) 2006 ZyXEL Communications Corporation.
P-2602HWNLI Support Notes
121