Placing Custom Size Originals - Ricoh VB2807800 Operating Instructions Copy Reference

Placing Originals
D
Select the paper size using the
scroll keys, and then press the
{OK} key.
1
The "
Programmed
pears.
When the regular size originals
settings are registered,
appears at the top of the copy dis-
play.
Note
❒ To cancel the registered original
size, press the {Clear Modes}
key.
E
Press the {Start} key.

Placing custom size originals

Note
❒ Paper that has a vertical length of
139–216 mm (5.5"–8.5") and a hori-
zontal length of 139–356 mm (5.5"–
14.0") can be placed with this func-
tion.
❒ For the ARDF, paper sizes that can
be set with this function are:
• one-sided originals: vertical 139-
216 mm (5.5"-8.5"), horizontal
139-1260 mm (5.5"-49.6").
• two-sided originals: vertical 139-
216 mm (5.5"-8.5"), horizontal
160-356 mm (5.5"-14.0").
18
" message ap-
A
Place originals face down on the
exposure glass, or face up into the
ARDF.
B
Select the paper tray or bypass
tray using {U} or {T}, and then
press the {#} key.
C
Select [Custom Size] using {U} or
{T} key, and then press the {OK}
key.
Note
❒ If you selected the bypass tray,
first select [Original Size] using
{U} or {T}, and then press the
{OK} key.
D
Enter the horizontal size of the
original using the number keys,
and then press the {OK} key.
Note
❒ If you make a mistake, press the
{Clear/Stop} key, and then enter
the value again.