Sending Massages Or Images; Creating And Sending A New Message - Yaesu FTM-100DR Operating Manual

Sending massages or images

Send messages or images from the transceiver. Sent data can be viewed by all stations
operating in digital mode on the same frequency.
There are the following three ways for sending messages or images.

(1) Creating and sending a new message

(2) Replying to the sender of the downloaded message or image data
(3) Forwarding the downloaded message or image data
Creating and sending a new message
Create a new message and send.
1
Press and hold
Displays "LOG SELECT" screen.
2
Rotate the DIAL to select [GM
then press
Displays the "GM MESSAGE" screen.
3
Rotate the DIAL to select [NEW], then press
4
Press (
Displays the message entry screen.
5
See "Input characters" on page 20 to input a message.
6
Press
Displays the entire message.
Tips • To save the created message press
appears on the upper side). For details, see
"Registering routine messages" on page 101.
• To continue message entry, press
appears on the upper side).
for over one second.
MESSAGE],
.
appears on the upper side)
Exchanging messages or images
.
(
(
99