Deleting Data From The List; Downloading Messages Or Images - Yaesu FTM-100DR Operating Manual

Exchanging messages or images
3
Rotate the DIAL to select [OK?], then press
Starts the deletion process.
After completing deletion, the display returns to the
data list screen.
Rows move up by one.
Tip To cancel deletion, select [Cancel], then press

Deleting data from the list

1
From the data list, select the data you want to delete by rotating the DIAL.
2
Press (
Displays the confirmation screen.
3
Rotate the DIAL to select [OK?], then press
Starts the deletion process.
After completing deletion, the display returns to the
data list screen.
Rows move up by one.
Tip
To cancel deletion, select [Cancel], then press

Downloading messages or images

When there is a message or image sent in digital mode from a station on the same
operating frequency, the content of the message or image is displayed for a certain
period of time on the transceiver screen. Message data can be downloaded to the
memory of the transceiver and image data can be downloaded to the microSD memory
card inserted into the transceiver.
When receiving a message
Tips
• While receiving an image, sender's call sign and ">>>" appear to indicate the reception progress of
the data.
• If the message cannot be downloaded successfully due to unsupported file format or other reasons,
"Not Completed" appears.
• If the image data cannot be downloaded to the microSD memory card successfully due to
insufficient memory space, "Insufficient SD's Memory" appears.
98
appears on the upper side).
.
.
.
.
When receiving an image