Connecting The External Power Supply Equipment - Yaesu FTM-100DR Operating Manual

Connecting the power supply

Connecting the external power supply equipment

When using the transceiver as a fixed station, use an external power source.
Cautions
z Use an external power source capable of supplying DC 13.8 V, a current capacity of 20 A or more.
z Make sure to switch OFF the power of the external power source before connecting.
1
Connect the DC power supply cable to the external power supply equipment.
Connect the red wire (+) of the supplied DC power supply cable to the positive (+)
terminal of the external power source, and the black wire (−) to the negative (−)
terminal of the external power source.
2
Connect the DC power supply cable to the main body.
Plug into the connector of the main body power cable until it clicks.
Main body rear panel
30
Power cable
(DC 13.8 V)
Fuse holder
Black
DC power supply
cable (supplied)
Red
AC power
outlet
Direct current
power supply