Yaesu FTM-100DR Operating Manual page 118

Setup-menu listing
Menu / Item
7 PRG REV TONE
8 BELL RINGER
9 SQL EXPANSION
10 WX ALERT
(USA Version Only)
5 SCAN
1 DUAL WATCH STOP
2 SCAN DIRECTION
3 SCAN RESUME
4 DUAL WATCH MODE
6 GM
1 RANGE RINGER
2 MESSAGE POPUP
3 RADIO ID
* For details of the functions, refer to the GM Function Instruction Manual.
7 WIRES-X
1 RPT/WIRES FREQ
FREQ
* For details of the functions, refer to the WIRES-X Instruction Manual.
8 CONFIG
1 DATE & TIME ADJUST Sets the date and time
2 TIME FORMAT
3 TIME ZONE
4 AUTO REPEATER
SHIFT
5 REPEATER SHIFT
6 REPEATER SHIFT
FREQ
118
Description
Set the idle line squelch 300 Hz to 3000 Hz 1500 Hz
Sets the number of
successive bell rings
Sets the squelch
type separately for
transmission and
reception
Weather alert operation
setting
Sets the signal reception
method
Sets the scanning
direction when scanning
starts
Sets the operation when
scanning stops
Sets the reception time
while processing the
dual reception function
Activates/deactivates
the alert sound when
detecting stations within
communication range
Activates/deactivates
the pop-up message
display
Displays the transceiver
IDs
Sets the operating
frequencies for
repeater and WIRES-X
operations.
Registers the preset
frequency
using the internal clock
Sets the time display
format
Sets the time zone
Activates/deactivates
the automatic repeater
shift function
Sets the repeater shift
direction
Sets the repeater shift
width
Selectable options
(Options in bold are the default
settings)
OFF / 1 time / 3 times / 5 times /
8 times / CONTINUOUS
ON / OFF
ON / OFF
AUTO / HOLD
UP / DOWN
BUSY / HOLD / 1 sec / 3 sec / 5 sec
0.3 sec to 10 sec 5.0 sec
OFF / ON
OFF / ON
- (uneditable)
MANUAL / PRESET
Depends on the transceiver version
month/day/year, hour : minute
24 hour / 12 hour
UTC ±14h (0.5 h interval) UTC ±0:00
OFF / ON
SIMPLEX / − REPEATER / + REPEATER
(Differs depending on frequency)
0.000 to 99.950MHz
(Differs depending on frequency)